Starlike® EVO

Starlike® EVO

Two-component acid-resistant epoxy grout. Part A consists in a mix of epoxy resin, sintered quartz micro spheres with fine granulometry and specific organic additives. Component B consists in an innovative organic catalyst with lower exposure risks for users. Once mixed together, the two components form a creamy and fluid mix, which is also suitable for vertical application with no dripping.
Once set, the product reaches very high performance levels in terms of mechanical strength and chemical resistance.

vantaggi e caratteristiche

  • Unlike other epoxy grouts on the market, the catalyst (Part B) is labelled only as an irritant
  • It is neither corrosive nor hazardous for the environment
  • The user can therefore rely on a very safe product to work with
  • Bacteriostatic product which prevents the spread of fungi and moulds
  • High mechanical strength
  • Non-absorbent
  • Stain-proof
  • Excellent chemical resistance
  • Stable and consistent colouring on all types of tiles with exclusive chromatic effects
  • Recycled material content ≥ 10%
  • The products are coloured by the sintered quartz micro spheres, which are surface-coloured, thus avoiding the release of pigments on the surface of the ceramics or mosaics, making cleaning easier and faster
  • Extremely easy application and cleaning, even compared to normal cementitious grouts
  • The particular fineness of the sintered quartz micro spheres contained in the product makes it possible to obtain extremely smooth and compact finishes
  • The product does not contain cement, thus avoiding the formation of efflorescence typical of cementitious products
  • Suitable for interior and exterior floor and wall applications, even in severe operating conditions
  • Approved for use on ships as a product with low flame-spread
  • Product exempt from restrictions for road, sea, air and rail transport
  • Product with very low volatile organic compound (VOC) emission rate. Complies with class EC1PLUS according to the EMICODE protocol and class A+ (Émission dans l’air intérieur - French Regulations)



Technical info


Technical sheets



realizations in which STARLIKE® EVO has been used



laying systems

solutions where the use of STARLIKE® EVO is recommended